Believe thay were made in Ft Collins Colorado by Forney Mfg. They also made the flycycle thing that you sat on like a motorcycle. It was up in a hanger when I went to Colo. A&M back in 1956. Forney basic business was making welders.
James, e-mail, 04.05.2012 23:34
Many years ago, I owned a Forney and loved it then as I do now. My recollection is that the engine was changed or reworked to provide 90 HP. Great plane. Mine was noisy for long flights. (7518C) Want one David?--go to Trade-A- Plane. They are averaging somewhere around $25,000. Periodically, i see one advertised for maybe $30,000 claiming a complete renovation. Some with pedals and some without.
Dr. Darrell L. Salsbury, e-mail, 11.11.2011 01:10
I purchased a l946 Model 415-C Ercoupe N93612 in Sept. of 1972. It had a metal wing (earlier versions were cloth) and a 75 hp. Continental engine. I seem to recall that the company had several owners, and as such, I think "Aircoups" were produced under various names; i.e. Aircoupe, Ercoupe and possibly Aercoupe ?? (names need further documentation for accuracy). With only a 75 hp. engine, the plane I had would out perform a Cessna 150 with equal take off weight. It would take off shorter, land shorter, and cruise slightly faster than the Cessna with a 100 hp engine. Crosswind landings were always "exciting" which gave the L-shaped nose gear and front wheel bearings quite a beating. Thus the front wheel always wobbled. An after-market forked nose gear was available which aleviated the problem and rudder kits could be purchased. On crosswind landings I would flare on the upwind side of the runway and allow the plane to slowly drift downwind across the runway. Just before stall I would turn slightly into the wind, "hooking" the upwind gear on the deck first which would help turn us straight down the runway without the white knuckles and horrible "squall" from the tires that resulted from simply crabbing into the runway.
Doug Rodrigues, e-mail, 13.03.2010 10:43
The Ercoupe and Aircoupe came equipped with a 75 hp engine. By changing to a larger carburetor throat, it became an 85 hp engine. Later, when it became the single tail Mooney Cadet, the Cadet performed worse than the twin tail version, and I've flown them both to know.
J. T. Smith, e-mail, 17.02.2010 00:34
When the US Air Force Academy was located at Lowry AFB (its original home), the Academy Aeroclub had an all-metal Aircoupe (aka Ercoupe) based at Stapleton Field in Denver, Colorado As a Cadet, it was the first powered aircraft I ever soloed. I believe it had a 65hp engine, and starting from 5000 ft, it took a long time to get to traffic pattern altitude. With no manual rudders, it needed castering main gear to permit cross-wind landings. If you needed to slip it, you could stick a hand out and spoil the airflow over the wing root. There was just a single brake pedal on the floorboard, and you steered the front wheel on the ground with the control wheel just like a car. All in all, it felt a lot like driving a Volkswagen with an automatic transmission. Great fun. I'd love to have one now.
Harry, e-mail, 04.06.2009 15:11
My uncle, William Heydet, owned and flew Aercoup N99051. Any idea where I might be able to research the history or present wherebouts of the aircraft ? Thanks.
DAVID TURNER RN, e-mail, 26.05.2009 09:20
I WANT A REASONABLY PRICED ONE WITH RUDDER PEDALS
If you want to send an email just replace '(@)' in the address with '@' !